GSABALL3.gif (2702 bytes)

Standard Bore Hybrids

 GSABALL3.gif (2702 bytes)
Vendor Trim Code          
Graphite Design

 

 15º 19º 23º 27º 31º
  H1 0 .5 1.0 1.5 2.0
UST   #1 #2 #3 #4 #5
  H2 0 .5 1.0 1.5 2.0
Grafalloy   16º 19º 21º 24+º  
  H3 0 .5 .75 1.0  
Aldila   #1 #2 #3 #4 #5
  H4   0 .5 1.0 1.5
All Hybrid Shafts BH Do not tip trim.  Butt trim only to final length.

  Tip trim amounts above apply to standard bore hosel design heads.  For all bore-through heads subtract 1" tip trimming from the
  above listed trim length.
  The above tip trim amounts are based on standard weight heads.  For lighter weight heads less tip trimming is suggested.